Safety Instructions
CAUTION! DO NOT open the amplifier, attempt any modifications or re-
pairs. There are extremely high voltages present and any servicing must
be referred to Destination Audio or an authorized qualified technician.
ATTENTION!
Opening the amplifier will void warranty.
WARNING! To prevent shock or fire hazard, never permit moisture or any
liquid to get into the amplifier. If an accidental spill occurs, immediately
shut off the power, unplug its A/C power cord and seek a qualified
technician for repair.
CAUTION! To reduce the risk of electric shock, do not remove the cover
(or back). No user serviceable parts inside: refer servicing to qualified
technician.
All safety instructions should be read before this amplifier is operated. Please
retain these safety instructions for future reference. Adhere to all warnings on
the amplifier and in this manual.
Ventilation:
The amplifier should be situated so that its location or position does
not interfere with its proper ventilation. The amplifier should not be situated on
a bed, sofa, rug or similar surface that may block the ventilation openings, nor
should it be placed in a built-in installation such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings.
Power Source:
The amplifier should only be connected to a power supply of
the type described in this instruction manual or as marked on the amplifier.
Precautions should be taken so that the grounding or polarization means of the
amplifier are not defeated.
Power Cords:
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular
attention to wall receptacles and the point where they exit from the amplifier.
Object and Liquid Entry:
The amplifier should not be exposed to dripping or
splashing and objects filled with liquids, such as vases or plants, should not be
placed on top of or next to the amplifier. Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through its ventilation
openings.
Damage Requiring Service:
This amplifier should be serviced by a qualified
technician when:
— The power supply cord has been damaged; or
— Objects have fallen or liquid has been spilled into the amplifier; or
— The amplifier does not appear to function normally or exhibits a
marked change in performance; or
— The amplifier has been dropped or the enclosure is damaged.
9
