14
MMT6X10 man
ENGLISH
ENGLISH
ASSEMBLY
ASSEMBLY
STEP 10
STEP 10
LIGHTING KIT INSTALLATION
1. Assemble the square light brackets (16, 23) to the trailer beds (24, 28) with M10 x 70 (17) bolts and
nuts. The license plate holder (15) should be installed on the left-side light bracket (16) (Fig. 9-1).
2. Install the lights (19, 22) and complete the wiring.
3. Mount the clearance light (5) on the frame using the self-tapping screws (Fig. 9-2).
4. Plug light connector into the wire harness.
NOTE:
The driver’s side light is the one with the clear lenses on the bottom, the license plate
bracket needs to be installed on the driver’s side as well. Attach all necessary wiring and fasten
lights to the side of the trailer.
Item N
o.
Description
Qty.
16
Left side light bracket
1
23
Right side light bracket
1
19
Left side rear light
1
22
Right side rear light
1
17
Hex M10 x 70 bolts & nuts (set)
4
5
Clearance light
2
15
License plate bracket
1
17
19
16
15
Fig. 9-1
SELF TAPPING SCREWS
Fig. 9-2
5
