Installation Manual of DTC-NVR-S-HD8
6
Chapter 4
Operating System Installation
4.1
Installing a HDD
Before you start:
Before installing a hard disk drive (HDD), please make sure the power is disconnected from the NVR.
A factory recommended HDD should be used for this installation.
Steps:
1.
Fasten the hard disk mounting handle to the hard disk with screws.
Figure 4. 1
Installing Screws
2.
Insert the key and turn in clockwise direction to open the panel lock.
Figure 4. 2
Unlocking Front Panel
3.
Press the buttons on the panel of two sides and open the front panel.
