Installation Manual of DTC-NVR-S-HD8
7
Figure 4. 3
Opening Front Panel
4.
Insert the hard disk along the slot until it is placed into position.
Figure 4. 4
Inserting the HDD
5.
Repeat the above steps to install other hard disks onto the NVR. After having finished the installation of all hard disks,
close the front panel and lock it with the key again.
Figure 4. 5
Locking Front Panel
4.2
Setting Boot Sequence
Purpose:
When installing the operating system, you need to manually set the CD/DVD-ROM Drive as the first boot type.
The default priority of boot sequence from high to low is: HDD8 > eSATA > USB.
