background image

SEARCHCOILS

13

Your detector is equipped with the latest generation NEW  SEF searchcoils 

(symmetrical electromagnetic field coils). The Standard SEF coils are the best 
performance coils. Compared to the Double D coils they have better ground 
balance,  more  stable  operation,  better  depth  of  penetration,  better 
pinpointing,  more  accurate  target  identification.  The  NEW  SEF  coils  have 
even better sensitivity, higher temperature stability, even better pinpointing. 
Your  detector  standard  package  includes  two  of  these  coils  -  9"x9"  and 
12"x12".

The  9"x9"  is  the  most  universal  size  of  searchcoils,  and  it  is  hardly  a 

coincidence that almost all the detectors on the market are equipped with 
such size of coil. This searchcoil has good sensitivity - to small and to bigger 
sized targets. It is good for search of jewelry, coins, and relic hunting. It is 
designed for best all-arround performance, in all types of detecting. 

The smaller search coils give better target separation, i.e. more distinct 

target response for metal objects buried closely together, which is very useful 
when hunting trashy areas. At the moment as accessory coils are offered the  
6" DD closed solid design coil and the 8"x6"SEF coil. 

The 12"x12" coil is recommended for TH-ers who has already accumulated 

experience in operating the detector. Its advantages towards the 9x9" coil are 
that it has a better sensitivity and depth, especially for the bigger sized targets, 
this searchcoil covers more ground. As disadvantages could be given its more 
nervous  operation  in  mineralized  and  trashy  grounds,  slightly  erratic 
operation  on  salt  wet  sands.  As  every  bigger  sized  coil  it  groups  targets 
situated closely together.

No one search coil is better than all the rest. Selecting the right searchcoil 

depends on the factors such as what are you searching for and search site 
conditions. 

All the search coils are light for their sizes, very well electrostatic shielded, 

resistant to shocks and shakes, perfectly balanced and waterproof.

They are all compatible and interchangeable, easy to mount and require no 

special tools.

Coil covers

 

Your searchcoils come standardly with coil covers. They are very useful to 

protect your searchcoil at any time, and we would warmly recommend their 
constant use.

Summary of Contents for EDS plus II























Reviews: