8
V100
Key
Function
START
In the manual counting mode, press this key to start counting.
MENU
Press this key to enter into the MENU Interface.
Long press this key and turn on the machine in the
meantime, can enter into the calibration mode.
ENTER
In the MENU interface, press this key can save the change and back
to the previous interface.
Press this key to confirm or enter into the sub-menu.
BATCH
Press this key can turn on/off the batch function, and the user can se-
lect the batch number among “100, 50, 20, 10, 5, off” by short pressing.
+1/+10
In the normal counting interface, press this key to turn on the BATCH
function; short press this key to “+1”; long press this key to “+10”.
In the MENU interface, press this key to adjust up sensitivity level or
other setting.
In the time setting, press this key to increase.
Key
Function
REP
Press this key to check the current counting report.
In the MENU interface, press this key to decrease sensitivity level or
other setting.
In the time setting, press this key to decrease.
Press this key to print the current counting report.
In the MENU interface, press this key to return previous interface.
MODE
1.Press this key to switch the counting mode: UV/MG, MIX, SGL, CNT.
(UV/MG: count the banknote with UV/MG detection.
MIX: count different denomination of one kind of currency together,
showing the counting amount.
SGL: count one denomination of one kind of currency together,
showing the counting amount.
CNT: only with counting function, without any detection. )
CUR
Press this key to choose the currency.
In the MENU interface, press this key to switch settings forward.
In the time setting, press this key to move right.
ADD
Press this key to turn on/off the ADD (accumulation) function.
In the MENU interface, press this key to switch settings backwards.
In the time setting, press this key to decrease.
In the time setting, press this key to move left.
CLEAR
Clear the counting result.
In the MENU interface, press this key to return previous interface.
In the time setting, press this key to change the time.
3. The introduction of the panel
START
MENU
ENTER
START
MENU
ENTER
REP
+1/+10
BATCH
CLEAR
ADD
CUR
MODE
Summary of Contents for V100
