0044-0391-0M Rev F
y
solo Series Owner’s Manual
27
DATA TRANSMISSION FORMAT
Data Transmission via USB
The USB port on the solo Series Digital Clinical Scale is a bi-directional port that can
receive and transmit data. It can be used to communicate to a computer by pressing the
key, or by transmitting a command from the computer to the scale.
To connect to a computer or other USB device, you will need a USB Type B cable to plug
into the USB port located under the small cover on the back of the display.
Output Format
The format below represents the output directly to a computer for processing of data and
includes commas between each field, and a carriage return to terminate the record.
Time, Date, Mother BMI, Height, Mother Weight, Baby Weight <CR>
12:00,12/01/20,21.5,5’03.0”,132.3lb,12.5lb
Remote Print Command
The host device (computer) can send the following command to get data from the scale.
<LF> P <CR>
This command is equivalent to pressing the key. The scale will respond by sending the
Output Format data (described above) to the computer.
Push in on arrow and
slide USB cover off.