Backplate
BP11 or BP13
STEP 8:
SECURE ROD / LATCH / CENTERLIFT ASSEMBLY TO DOOR
8d
(VIEWED FROM BOTTOM EDGE OF DOOR)
Note: Bottom bracket may slide up on rod
during assembly.
It may be necessary to pull it towards bottom
edge of door with a simple wire hook.
8a
8a.
Attach top latch to door with six screws.
8b.
Attach bottom bolt mounting brackets to bottom bolt case
with six screws.
8c.
Attach bottom bolt mounting brackets to door
with six screws.
8d.
Attach back plate to centerlift mechanism
with two screws - DO NOT OVERTIGHTEN.
Assembly hint: Assemble one screw
loosely without backplate,
then add second screw through backplate.
Remove first screw, align backplate and
then re-install first screw.
104924 Page 13
ATTACH
top latch to door
with (6) phillips pan head
screws
ATTACH
bottom bolt mounting
brackets to bottom bolt case assembly
with (6) button head socket cap screws
8b
8c
ATTACH
bottom bolt case to door
with (6) phillips pan head screws
ATTACH
backplate to
centerlift mechanism with
(2) phillips flat head screws
THIS SURFACE
MUST
BE FACING
INNER DOOR FACE
10-24 x 1/4"
10-24 x 5/8"
1/4-20 x 5/8"
1/4-20 x 5/8"
OR
10-24 x 3/4"
USE
included Loctite
Bottom bolt
mounting bracket
P/N 105982-3
Bottom bolt
mounting bracket
P/N 105982-4
