104924 Page 4
Screw style & size
Description
Used on and Drill Bit used
Lockwashers used with 1/4-20 screws
Used to install backplate & endcap bracket to door
Drill Bit - #7 or 13/64"
Used to secure device centercase to backplate
Used to install endcap to endcap bracket
(Multiple finishes included)
Used to install centercase cover to backplate
(Multiple finishes included)
ADVANTEX 87 Device Mounting Hardware
Fastener Table
1/4-20 x 1" PPH
P/N: 100980
1/4-20 x 1-1/2" PPH
P/N: 100954
10-24 x 1/4" PPH
P/N: PP-5304-104
10-32 x 5/16" PFH
P/N: 101632-2
6-32 x 3/8" PFH
P/N: 100162-106
1/4" Lockwasher
P/N: PP-5067-25
Tools Required
Used to install backplate & endcap bracket on 2" or
greater door thickness with Trim and/or sex nuts
10-24 x 3/4" PFH
P/N: 100112-110
Power Drill
Hammer
Hack Saw (chopsaw preferred)
Safety Glasses
Phillips Screw Driver
Hex Wrench -1/8 & 5/32
Tape Measure
Tap Wrench
Masonry Bits - 3/16", 1/4", 5/16", 7/8", & 1"
Pencil
Pliers
Drill bit set
Center Punch
Level
10-24 x 5/8" PFH
P/N: 100112
Used to fasten centerlift assembly to backplate
(Use 100112-110 for 14 gauge or heavier)
Used to fasten centerlift assembly to backplate
(Use 100112 for 16 gauge & thinner)
Hardware Table for BASIC device mounting.
Additional hardware is provided per the device configuration in kit form and
is addressed on the appropriate pages as required.
Used to install backplate and endcap bracket to door
If using sex nuts with TRIM:
Drill 9/32 hole through interior door face.
Drill 1/2 hole through exterior door face.
If using sex nuts without TRIM:
Drill 3/8 hole through exterior door face.
1/4-20 X 1.60 Sex nut
P/Ns:
105274-9 (Stainless Steel)
105274-2 (Brushed Brass)
105274-25 (Oil Rub Bronze)
Sex nuts, if ordered. Sex nuts are used with screws in device hardware kit.
