104889 Page 4
STEP 7B: For
Wall Mounting (SK)
-
Backplate Mounting
FRAME/MULLION
DOOR
Skip to Step 9 to continue non SK installation
Backplate holes
Drill #7 (.201") for #1/4-20
machine screws
Drill 7/32" or 3/16" for #14
sheetmetal screws
(2 places)
Magnet holes
#6-32 machine screws
#6 sheetmetal screws
(2 places)
LHR installation shown
for reference only
STEP 7: For Door Mounting -
Door Prep & Backplate / Magnet Mounting
(for Wall mounting (SK) go to step 7B)
Place Backplate and Magnet locator on door as shown below.
Mark Backplate and Magnet holes on door and frame/mullion.
Remove Backplate and Magnet locator
before
drilling holes.
or
or
Install magnet and backplate
or
Table A: Selector Switch Functions
STATUS
INDICATOR
(SWITCH B)
OFF* No indication that device is armed or disarmed.
ON
DP
(SWITCH A)
OFF*
Door chime mode
ON
Door prop mode
( *Default settings; **Will shorten battery life)
ARMED - red LED blinks approximately every 6 seconds.**
DISARMED - green LED blinks approximately every 6 seconds.**
(installer option depending on base material)
