DETHONRAY Co., Ltd.
All Rights Reserved.
6
Gain H/L
*
Adjust to “Gain L” gear, it means the H1 is in low
gain mode, which suitable for low impedance and
high sensitivity headphones.
PO/LO
*
Adjust to “Gain H” gear, it means the H1 is in high
gain mode, which suitable for high-impedance
headphones that require thrust
.
*
After setting H/L, you need to readjust the knob
switch before the gain setting can take effect. It is
recommended to complete the change at a low
volume to avoid sudden changes in volume and
damage to hearing.
*
“PO” gear, it is the headphone output mode.
*
“
LO” gear，only support line out mode, when the
H1 is connected to the headphone amplifier or
professional audio equipment.
