3-Events screen:
-This will show the events classified by
Alarms
,
Faults
and
Disabled
. A counter will show the
number of events with each status.
-The
log
will display all of the events.
-The events are sorted by
zones
in each tab.
Events that are not associated with any zone are
grouped into
system events.
-You can configure the unit not to show system
events or to filter zones.
-A
Communication failure with master
or
Communicated restored with master
fault will
be displayed when communication between a
slave unit and the master is lost/restored.
-A
Panel not connected
or
Panel reconnected
fault will be displayed when communication
between the
master
unit and the
panel
is
lost/restored.
MI 078 en 2019 a
6. User guide
The screen displays 3 different areas:
1-Main screen
:
-The unit is shown as a panel repeater.
-You can see the general status of the panel
through the LEDs and the events log.
-When you press on events you can access the
associated maps.
-You can also perform actions on the panel:
Sounders On
,
Sounders silence, Silenced buzzer
and Reset
-The
zone LEDs
are red if there is an alarm, flashing
yellow if there is a fault and steady yellow if it has
been cancelled. Press on them to access the map
associated with the zone.
2-Map screen:
-This display's the panel's status bar (OK, Alarm, Fault).
-And the map window, which shows the maps
associated with each zone.
Navigation between maps:
You can navigate between the maps:
1-
From
their
related areas
(if any). By pressing on the
areas contained in this map (coloured if they have
pending events, greyed out if not), you can go to the
other areas to which you have linked them.
2-
To
their
parent area
(if you have configured this).
This is located at the top left of the screen. You will be
taken to this map if you press on it. The parent map
shows the parent area in red.
Devices:
These are shown coloured on the map,
according to this status (normal, alarm, fault). When
you press on them, they show information about the
unit.
Shows/hides devices
Shows/hides area names and parent
map
