DE
18
Setting the hour (1st watch mechanism)
1. Pull out crown 1. The seconds hand will stop.
2. Turn the crown half a turn clockwise and hold this position. The hour
hand will now move backwards. Release the crown once the display
shows the desired time. Press button A to switch between 12 and 24
hour mode.
3. Push the crown in to complete the adjustment.
Setting the minutes (2nd watch mechanism)
Pull out crown 2, turn the crown until the hand is in the desired position
and push the crown back in. The minute display on the 2nd watch mecha-
nism can be used for either or both of the other two watch mechanisms.
Setting the 2nd time zone (3rd watch mechanism)
Pull out crown 3, turn the crown until the time is in the desired position
and push the crown in again.
EN
Summary of Contents for DT2057
Page 1: ...DETOMASO Volturno DT2057 ...
Page 2: ......
