Figure 10. Engine Oil Drain Plug, Oil Pan
4.
Remove both the filter cap and the filter element. To release the filter element, twist the lower edge of the filter
element to the side.
Figure 11. Cap with Oil Filter Element
NOTICE:
To prevent damage to the filter housing, ensure that no foreign objects get inside it. Do not wipe clean
the filter housing.
5.
Replace the O-ring on the cap. See figure above.
6.
Install the new filter into the cap. Make sure the filter element is securely in place.
7.
Screw the cap onto the oil filter housing. Tighten the cap 25 N·m (18 lb·ft).
8.
Install the oil drain plug, using a new O-ring. Tighten the plug 65 N·m (48 lb·ft).
9.
Add new engine oil through the oil fill.
EuroV MBE 900 Operators Manual
All information subject to change without notice.
39
DDC-SVC-MAN-0207
Copyright © 2019 DETROIT DIESEL CORPORATION