AL-602-03-902 EnoPuck BASIC
Product manual
Page 7 of 19
© DEUTA Controls GmbH
Paffrather Str. 140, 51465 Bergisch Gladbach
Tel.:+49 2202 285 57- 61
06.07.2021
Hauptstraße 76, 32479 Hille
Tel: +49 5734 51466 - 0
Technical data might change
www.deuta-controls.dnet
Fax:+49 5734 51466 - 28
4.3 Observe intended use
The
AL-602-03-902 EnoPuck BASIC
must not be used in any relation with equipment
that supports, directly or indirectly, human health or life or with applications that can
result in danger for people, animals or real value.
4.4 Observe statutory provisions for operating frequency range.
The
AL-602-03-902 EnoPuck BASIC
must only be operated in compliance with the
country-specific provisions regarding operation of radio equipment.
4.5 Non-conduction mounting surface
A non-conductive mounting surface is necessary.
Ensure the
AL-602-03-902 EnoPuck BASIC
is mounted on a non-conductive surface.
If it is not, performance may be adversely affected.