8
Assembly from crates:
Assembly from crates:
Prerequisites
Select a suitable level surface of about 10m x 10m for the assembly.
Lifting gear with lifting attachments capable of lifting at least 1500 KG.
Supports to bear machine parts securely
Spanners to tighten screws.
Open crate
>
Put the crate on level ground and open it without damaging the contents.
>
Remove loose parts (wheels, boxes), and clear the space around larger
components.
Do not connect hydraulic control units
Do not connect hydraulic lines.
Hydraulic cylinders activated during the assembly can cause damage
to the machine.
Fit rear swath
>
Remove fastenings (wires, lashing straps) and take rear swath assembly
out of the crate. Stop points are indicated by arrows on the illustration.
>
Place the rear swath assembly securely on supports
Tandem axles
>
Mount wheels on tandem axle
Observe torques
Tighten wheelnut only to 20 Nm. Higher torques damage the plastic
washer
Stop points
20 Nm
Plastic washer
