User Manual DEV 1953
124
Copyright DEV Systemtechnik GmbH 2015-2017
5.9.4.3.9.4
.application.portTable.portEntry.poHasRfSense
OID:
.1.3.6.1.4.1.21035.41.2.9.1.4
.x
Syntax:
INTEGER {yes (1), no (2)}
Access:
read-only
Description:
The indication whether RF level information is provided or not.
Note:
"
1
" (yes) is returned for the input ports of sensing switch modules (and of
digital signal switch modules) and for the input port of ASI/SDI distribution
amplifier modules, otherwise "
2
" (no).
5.9.4.3.9.5
.application.portTable.portEntry.poRfSense
OID:
.1.3.6.1.4.1.21035.41.2.9.1.5
.x
Syntax:
INTEGER32
Access:
read-only
Description:
The measured RF level in [dBm/10].
"
9999
" means not available or not present.
Example:
"
-129
" ≡ -12.9 dBm (only for input ports of sensing switch modules)
5.9.4.3.9.6
.application.portTable.portEntry.poRfLimit
OID:
.1.3.6.1.4.1.21035.41.2.9.1.6
.x
Syntax:
INTEGER32
Access:
read-write
Description:
The RF threshold level in [dBm/10].
"
9999
" means not available or not present.
Example:
"
-300
" ≡ -30.0 dBm (only for input ports of sensing switch modules)
Note:
The factory setting is stated in chapter 4.3.1.
5.9.4.3.9.7
.application.portTable.portEntry.poHasBias
OID:
.1.3.6.1.4.1.21035.41.2.9.1.7
.x
Syntax:
INTEGER {yes (1), no (2)}
Access:
read-only
Description:
The indication whether bias (i.e. LNB power) is provided or not.
For this type of device, "
2
" (no) is returned for all ports.
5.9.4.3.9.8
.application.portTable.portEntry.poBiasOnOff
OID:
.1.3.6.1.4.1.21035.41.2.9.1.8
.x
Syntax:
INTEGER {on (1), off (2)}
Access:
read-write
Description:
The LNB power (or bias) supply state can be read or set.
For this type of device, "
0
" is returned for all ports.
5.9.4.3.9.9
.application.portTable.portEntry.poBiasCurrent
OID:
.1.3.6.1.4.1.21035.41.2.9.1.9
.x
Syntax:
INTEGER32
Access:
read-only
Description:
The measured current in [mA/10].
For this type of device, "
9999
" is returned for all ports.
