Customer Documentation DEV 5071
Copyright DEV Systemtechnik GmbH 2007-2017
17
Note:
Note, that after the exchange of a power supply module, the replacement
power supply module inherits the settings of the corresponding slot!
4.3.2
Factory Default Network Settings
The factory default network settings of the device are:
IP-Address:
192.168.0.11
Netmask:
255.255.255.0
Gateway:
192.168.0.99
For changing the network setup, please refer to chapters 4.4.2.2 & 5.4.5.3.
4.3.3
Factory Default SNMP Settings
The factory default SNMP settings of the device are:
Read Community:
public
Write Community:
private
Local/Remote changeable per SNMP:
Note, that if a
Trap Destination IP Address
is defined without the explicit
assignment of a port, the standard SNMP trap port
162
is assigned implicitly.
For changing the SNMP setup, please refer to chapter 5.4.5.4.
There are software factory defaults for some SNMP objects, please refer to
the corresponding chapters:
.application.controlMode
chapter 5.5.4.2.1
.application.channelTable.channelEntry.channelOutVoltageSet
chapter 5.5.4.2.5.6
.application.channelTable.channelEntry.channelOutCurrentSet
chapter 5.5.4.2.5.8
.surveillance.trapEnableMask
chapter 5.5.4.3.1
.surveillance.errorEnableMask
chapter 5.5.4.3.2
