User Manual DEV 5072
Copyright DEV Systemtechnik GmbH 2016-2017
49
5.5.3
The dev-5071 MIB Tree
The MIB is stored on the controller of the device and can be downloaded via the
SNMP setup of the Web Interface (please refer to chapter 5.4.6.2.2) or directly with
a web browser via the link:
http://<IP-of-the-device>/devPower.mib
As shown above, the section .dev-5071 is divided into four branches:
• .devPowerTraps (chapter 5.5.4.1),
• .instrument (chapter 5.5.4.2),
• .application (chapter 5.5.4.3), and
• .surveillance (chapter 5.5.4.4).
In the corresponding sub-chapter, the content of each branch is shown expanded
and each object within a branch is described.
5.5.4
MIB Objects
In the following, the objects of the section .dev-5071 in the MIB tree are described.
The complete name of a MIB object results out of the concatenation of the MIB-
string (please refer to chapter 5.5.2):
iso.org.dod.internet.private.enterprises.dev-systemtechnik.dev-5071
and of the corresponding object.
E.g., the complete textual OID of the object
.instrument.controllerMac
is
("
⌡
" and "
⌠
" are symbolizing that the two consecutive lines are actually one line):
iso.org.dod.internet.private.enterprise.dev-systemtechnik
⌡
⌠.
dev-5071.instrument.controllerMac
Note:
• Some of the objects are set to a factory default
chapter 4.3.3
• The following objects can be modified in Remote Mode only:
• .application.channelTable.channelEntry.channelOn
chapter 5.5.4.3.5.2
• .application.channelTable.channelEntry.channelEnable chapter 5.5.4.3.5.11
• .application.outputVoltageSet
chapter 5.5.4.3.6
• .application.outputCurrentLim
chapter 5.5.4.3.7
• .application.upsBatteryTest
chapter 5.5.4.3.14
• And some objects can be modified in all modes of operation:
• .application.controlMode
chapter 5.5.4.3.1
• .surveillance.trapEnableMask
chapter 5.5.4.4.1
• .surveillance.errorEnableMask
chapter 5.5.4.4.2
