background image

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 2 -

GSM MODEM OPTION - FEATURES AND USAGE

The described Features and Usage of the GSM Option is compatible with following DEVA Units:

DB44

 – Compact FM Radio Monitoring Receiver

DB45

 – DSP-Based FM Radio Receiver and Modulation Analyzer

DB4004

 – DSP-based FM Radio Monitoring Receiver

DB7000

 –  FM Radio Re-Broadcast Receiver with Built-in IP Audio & MP3 Backup Players

DB7007

 – Advanced FM Radio Re-Broadcast Receiver with IP Audio & MP3 Backup Players

The DEVA FM Monitoring receivers supports a very wide range of GSM Modems. However, 

we suggest the usage of the following model - Sierra Wireless AirLink. This is the modem that is 

provided from DEVA Broadcast if the feature has been ordered along with the DEVA Unit. 

The GSM modem model is directly PIN to PIN compatible with the DEVA Unit GSM Modem’s 

connector,  and  by  simply  using  a  direct  cable,  you  will  have  not  any  troubles  with  the  data 

communication and audio insertion.

Before connecting the GSM Modem to the DEVA Unit, it is necessary to set up the parameters 

for normal operation. Please bear in mind that:

• 

GSM  modem  does  not  have  an  automatic  detection  of  the  baud  rate  (AUTOBAUD 

function). The most important thing is to set up the GSM Modem communication settings. 

The Communication speed must be 9600 bps, Data Bits: 8; Parity: None; Stop Bits:1.

•  The SIM Card PIN code must be disabled in order to avoid a configuration problem of the 

modem. We suggest you to do this procedure using a GSM phone device of choice. This 

will save you a lot of time for reading the GSM Modem documentation. In case you decide 

to do that using the GSM Modem please refer to its User Manual for details.

IMPORTANT: 

Once  the  GSM  modem  is  properly  installed,  the  DEVA  Unit  must  be  pre-

configured to receive messages from up to 5 authorized numbers. This can be made via the WEB 

interface of the DEVA Unit. Upon successful installation, a notification message will appear on the 

unit’s LCD/OLED screen (if such is available). Using this screen you can find the best place with 

good GSM Network coverage for the installation of the GSM modem. 

NOTE:

 For information, how the DEVA Unit can be accessed via the WEB Interface, please 

refer to the respective quick user guide for the device in question. All the documents are available 

at 

www.devabroadcast.com/downloads

Summary of Contents for DB45








Reviews: