Note:
When password is wrong alarming sound di.. di.. di.. 3 times.
When lock shows this signal
means low voltage.
When input management password to unlock, user password will be changed back to
default “1234”.
USB-KEY Interface
Battery box
Knob
Touch pane
Low Voltage Indicator Light
How to change the button battery
Put the needle into this hole vertically.
Press the needle to make the battery holder come out.
Place the cathode side of the button battery inward of the
battery holder the put the battery holder into the lock body.
Lock & Unlock
1.Unlock
Input factory default password “1234+OK” ,or Input factory default management
password “4321+OK”.
Buzzer gives out a long di.... sound.
When the unlocking indicator light is on.
Rotate the knob within 3 seconds to open the lock.
Setting
Input current user password “1234+OK” or management password “4321+OK”, buzzer
gives out a long di.... sound, and unlocking indicator light will be on.
Press OK at least 2 seconds, twinkle.
Input new password, for example “123123” press OK, when you heard a long di.... sound
means password already been changed.
How to operate
Rotate back the “Knob” to lock position.
Unlocking Indicator Light
Locking Indicator Light
Note:
Password can be consisted of 4-15 digits, pls note that the management password can not
be the same as user password.
2.Lock
1/
3
1.Change password
Summary of Contents for Smart Lock
Page 1: ...Smart Lock Instruction ...
