- 25 -
6 - Parameters/Setup
Parameters/
Setup
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
You can print the functions guide and the available setup
of your multifunction machine.
Date/Time
At any moment you may change the date and time on
your multifunction machine.
21 - SETUP / DATE/TIME
1
Press
, enter
21
using the keypad. Confirm with
OK
.
2
Enter the numbers of the required time and date
one after another (for example November 8 2004 at
9h33, press 0 8 1 1 0 4 0 9 3 3) and press
OK
to
confirm.
3
To exit this menu, press
.
Your fax number/Your name
Your multifunction machine will print out your fax number
and your name on each document it transmits if you save
these settings.
22 - SETUP / NUMBER/NAME
1
Press
, enter
22
using the keypad. Confirm with
OK
.
2
Enter your fax number (20 digits max.) and press
OK
to confirm.
3
Enter your name (20 characters max) then press
OK
to confirm.
For example, if you want to type the letter C, press
the key
C
until it appears on the screen.
4
To exit this menu, press
.
Type of network
You can connect your fax to either a PSTN or a private
network such as private automatic branch exchange
(PABX). You must select the network which is in use.
To select the type of network:
251 - SETUP / TEL. NETWORK / NETWORK TYPE
1
Select option
PABX
or
PSTN
then confirm your
choice with
OK
.
2
To exit this menu, press
.
Geographical settings
These settings will enable you to use your machine in
different preset countries using different languages.
Country
By choosing a country, you initialise:
•
the settings for the public telephone network,
•
the language by default.
To select the country:
201 - SETUP / GEOGRAPHICAL / COUNTRY
1
Select the required option and press the
OK
key to
confirm.
2
To exit this menu, press
.
Network
This setting enables you to manually set the type of public
telephone network (PSTN) for a country, so that your
machine can communicate over the public telephone
network in compliance with the applicable standards.
By default, setting a country using the
201 OK
command automatically sets the type of PSTN to use
in the selected country.
To manually select the type of public telephone network:
202 - SETUP / GEOGRAPHICAL / NETWORK
1
Select the required option and press the
OK
key to
confirm.
2
To exit this menu, press
.
To benefit from this feature, you must set
SENDING HEADER
to
WITH
(
Technical
Parameters
, page 28).
If none of the options in the list is suitable,
select the "OTHER" option.
These settings are different from the
NETWORK TYPE
, which allows you to
choose between public and private network.
