- 30 -
6 - Parameters/Setup
Printing the functions guide
51 - PRINT / FUNCTIONS LIST
1
Press on
and enter
51
with the digital keypad.
The printing of the functions guide starts.
Printing the logs
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
•
date and time of the incoming or outgoing document,
•
subscriber’s number or E-mail address,
•
transmission mode (
Normal
,
Fine
,
SFine
or
Photo
),
•
number of pages sent or received,
•
call duration,
•
incoming or outgoing results: noted
CORRECT
if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
•
reason for call error (example: your subscriber does
not answer)
To print the logs:
52 - PRINT / LOGS
1
Press on
and enter
52
with the digital keypad.
The printing of the logs starts.
Print the list of setups
To print the list of setups:
54 - PRINT / SETUP
1
Press on
, enter
54
with the digital keypad.
The printing of the list of setups starts.
Font printing
You can print the list of fonts installed on your terminal at
any time.
To print PCL fonts:
57 -
/ PCL FONTS
To print SG Script fonts:
58 -
/
SGSCRIPT FONTS
Lock the machine
This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
811 - ADVANCED FCT / LOCK / LOCKING CODE
1
Press on
, enter
811
with the digital keyboard.
2
Enter your lock code (4 digits) with the keyboard,
confirm with
OK
.
3
Enter again your lock code (4 digits) with the
keyboard, confirm with
OK
.
4
Quit this menu by pressing the
button.
Lock the keyboard
Everytime you use your machine, you will have to enter
your code.
812 - ADVANCED FCT / LOCK / LOCK KEYBD.
1
Press on
, enter
812
with the keyboard.
2
Enter the lock code and confirm with
OK
.
3
With the buttons
or
, choose
WITH
and
confirm with
OK
.
4
Quit this menu by pressing the
button.
95 - Symbol set
This parameter lets you set the
default character set. The possible
values are included between CS1
and CS30 inclus. The default value
is CS1 (Roman8).
96 - NBR. WEP
Keys
Number of WEP keys allowed
(from 1 to 4).
The printing is not possible on A5 paper
format.
The printing is not possible on A5 paper
format.
The incoming and outgoing logs are printed on
the same page.
Parameter Signification
The printing is not possible on A5 paper
format.
If a code is already registered, enter the old
code before typing the new one.
