7
Using the Utility Mode
7-8
D1531iD/D1831iD
Book Binding Position
Select whether to let the copier scan the left-hand-side page (Left-bound)
or the right-hand-side page (Right-bound) first when it scans an open
book.
G
The default value is “Left-bound.”
Margin Setting
Choose the width of the file margin to be set in the copy in the range
between 0 mm (0) and 20 mm (3/4) (in 1-mm (1/16) increments).
G
The default value is “10 mm (1/2).”
Erase Setting (Left, Upper, and Frame)
Set the erase width for each of the Left, Upper, and Frame Erase copies
in the range between 5 mm (1/4) and 20 mm (3/4) (in 1-mm (1/16)
increments).
G
The default value is “10 mm (1/2)” for Left, Upper, and Frame Erase.
Auto Panel Reset
Select the time it takes the auto panel reset function to be activated from
among “30 seconds,” “1 min,” “2 min,” “3 min,” “4 min,” or “5 min,” or not
activated at all.
G
The default value is “1 min.”
Energy Saver
Set the time it takes the copier to enter the Energy Saver mode, from 1
min to 240 min (in 1-min increments).
G
The default value is “15 min.”
Auto Shut OFF
Set the time it takes the Auto Shut OFF function to be activated, from 15
min to 240 min (in 1-min increments). To disable the Auto Shut OFF
function, first “authorize” the “Disable Auto Shut OFF” under the
Administrator Mode (p.7-26) before selecting “Auto Shut OFF disabled.”
G
The default value is “30 min.”