4
Loading Originals
4-6
D1531iD/D1831iD
4.3
Place the Original on the Original Glass
The method for positioning the original differs depending on the type of
original being used. Be sure to use the appropriate method that best suits
the type of original. Refer to p.4-2 for information on using the Automatic
Document Feeder.
Precautions for Placing the Original on the Original Glass
Care should be used when positioning the following types of originals.
An original of a nonstandard size:
G
The copier is unable to detect the original size automatically, meaning
that neither Auto Paper nor Auto Size can be used. Therefore, use the
[Paper] key to select the paper size, or the [Zoom] key to select the
zoom ratio. (p.5-11)
A highly transparent original (OHP transparencies, translucent paper,
etc.):
G
Place a blank sheet of paper of the same size over the original. (p.4-8)
A book or other three-dimensional object:
G
Let the copier scan the contents of the original with the Original Cover
or the Automatic Document Feeder raised. Do not attempt to push the
Original Glass with excessive force, as a malfunction could result.
The maximum load resistance of the Original Glass is 3 kg (6-1/2 lb).
