Product Guide ineo 1051/1200
49
Copy
Specifications
Max Copy Density
When max density chart is copied in default mode:
1.45 or higher
Back ground 1.00% or less
Gradation reproducibility
When KGS-20-Grade Gray Chart is copied:
Text & Photo mode:
8 grades or more
Photo mode:
11 grades or more
Copy Resolution
When Resolving power chart is copied in monochrome text mode:
Tolerance
level
Full size, Enlargement
5.0 line / mm
Reduction
5.0 lines/
x magnification
Image distortion
Direction
1:1 copy
When using zoom
CD distortion ratio
±0.3% or less
±0.5% or less
FD distortion ratio
±0.3% or less
±0.5% or less
Diagonal distortion ratio
±0.3% or less
±0.5% or less
Density variation
Half tone:
diameter 25mm or less: 0.10 or less
Full: 0.20 or less
Black chart:
Full: 0.10 or less
White spots caused by PC-
drum
Following Tolerated number of spots to be satisfied at 1 copy.
Max length (mm)
Tolerated number of spots in 1 copy
below 0.3
Not specified
0.3 to below 0.5
3 spots or less
0.5 or longer
No occurrence
Black spots
Following Tolerated number of spots to be satisfied at 1 copy.
Max length (mm)
Tolerated number of spots in 1 copy
below 0.3
Not specified
0.3 to below 0.4
3 spots or less
0.4 or longer
No occurrence
Fusing grade
Plain paper
(90 g/m
2
or less)
Thick paper
(91 g/m
2
or more)
Test environment
LL (10°C, 15% RH)
NN (23°C, 50% RH)
Image density 1.0
90% or higher
90% or higher
Linearity
CD distortion Linearity:
0.5 mm or less
FD distortion Linearity:
0.7 mm or less
Leading edge registration
error
Following registration to be satisfied, when chart is copied:
Platen copy:
0±1.5 mm / deviation of each feed source
3
σ
0.75mm
ADF copy:
0±2.0 mm / deviation of each feed source 3
σ
1.0mm
