Field Service Ver. 1.0 Apr. 2005
11. Security
109
ineo 161
ineo 210
Adjustment / Setting
11. Security
11.1 Security Function Setting Procedure
• Security is used to set the security functions.
11.1.1
Procedure
1.
Call the Service mode to the screen.
2.
Press the following keys in this order:
Stop
→
9
3.
The Security mode screen will appear.
A. TOTAL COUNTER COUNT
B. SIZE COUNTER COUNT
C. PLUG-IN COUNTER COPY
D. MACHINE COUNTER
<Count-up Table>
1: 1 count 2: 2 counts
Purpose/Use
To set the count-up method.
Setting/
Procedure
• The default setting is “0.”
“0” : One count-up for each copy cycle (ordinary mode)
1 : Multiple count-up according to the paper size and copy mode.
2 : Multiple count-up according to the paper size and copy mode.
Purpose/Use
To set the paper size to be counted.
Setting/
Procedure
• The default setting is “1.”
0 : Not counted
“1” : A3/LEDGER L
2 : A3/B4/LEDGER L/LEGAL L/8K L
3 : A3/B4/FLS/LEDGER L/LEGAL L/11 × 14 L/8K L
Purpose/Use
To select whether to enable or disable copying according to whether the Plug-in
Counter is mounted or not.
Setting/
Procedure
• The default setting is “ENABLE.”
“ENABLE”
DISABLE
Purpose/Use
To select whether to enable or disable copying according to whether the Machine
Counter is mounted or not.
Setting/
Procedure
• The default setting is “DISABLE.”
ENABLE
“DISABLE”
Size Counter Count Mode
Size other than those set
Set size
Total Counter Count Mode
0
1
2
0
1
2
Total Counter
1
1
2
2
Size Counter
Not Count
1
1
2