User's Guide
- 73 -
3. From the printer control panel, navigate to:
>
Copy
>
>
Collate
> select the collate setting you want > select the number of copies or enter
a number on the keypad >
Note:
If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to
Scan the Next Page
, and then press
.
4. Press the left or right arrow button to scroll to
Finish the Job
, and then press
.
Placing separator sheets between copies
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>
Copy
>
>
Separator Sheets
4. Select
Between Copies
,
Between Jobs
,
Between Pages
, or
Off
.
5. Select the number of copies or enter a number on the keypad, and then press
.
Note:
If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to
Scan the Next Page
, and then press
.
6. Press the left or right arrow button to scroll to
Finish the Job
, and then press
.
Copying multiple pages onto a single sheet
To save paper, you can copy either two or four consecutive pages of a multiple-page document onto a
single sheet of paper.
Notes:
•
Make sure the paper size is set to letter, legal, A4, or JIS B5.
•
The copy size must be set to 100%.
Summary of Contents for ineo 3320
Page 1: ...User s Guide ineo 3320 ...