9
Product Guide – ineo 40P
Printer Specifications
WARM-UP TIME
20 sec. or less
FIRST PRINTING TIME
9.5 sec. or less (A4 or Letter from Tray 1)
PRINT SPEED
43 ppm (A4 Simplex)
26 ppm (A4 Duplex)
RESOLUTION
600 x 600dpi x 1 bit
1200 x 1200dpi x 1 bit
MAX. PRINTABLE AREA
4 mm deletion on all edges, in case of Duplex printing
6 mm on leading edge
OUTPUT CAPACITY
Face down: 500 sheets
Face up: 70 sheets
POWER REQUIREMENT
120V / 220 – 240 V, 50/60 Hz
POWER CONSUMPTION
1.3 kW or less
Printing: 910 W or less
Standby: 140 W or less
PRINTER DIMENSIONS (W x D x H) mm
421.8 x 465.4 x 404.5
PRINTER WEIGHT (kg)
25 (w/o consumables)
PROCESSOR
88F5281/500MHz
MEMORY
128 MB standard, max. 384 MB
HARD DISK
40 GB (optional)
INTERFACE
100Base-TX, 10Base-T, 1000Base-T, USB2.0 (Hi-Speed
support), IEEE 1284 (ECP support only) [1284.4 is not
supported], Host USB (USB Drive Printing)
EMULATION
PostScript3 (3016)
PCL6(XL3.0)
PCL5e/c
XPS (Version 1.0)
PDF Direct Printing (Version 1.6)
JPEG/TIFF Direct Print
NETWORK
Protocols
Network Service
TCP/IP, EtherTalk, IPX/SPX, UDP
TCP/IP : IPv6
IPP1.1, SNMP, HTTP
HTTPS
WSD
IEEE 802.1x
