29
HDS9336
Common Faults and Solutions
(1) The output image may be flickered by interference. The
quality of the wire used may be poor, and the shielding layer
of the wire is not well prepared. When there is a strong radio
near the use environment, radio waves may interfere with
the transmission of the signal, resulting in unstable signal
flicker. Please use the wire produced by regular
manufacturers, such as Belden, Jia Nai Mei.
(2) When plugging in the audio and video interface, if
there is obvious static electricity, the device power ground
wire may not be good grounding, please ground in the
correct way; otherwise it will easily damage the host and
shorten the life of the mainframe.
(3) When RJ45 (generally: Computer network port)
cannot control the Switcher, check whether the
communication port set by the control software corresponds
to the serial port of the connected device; check if the
communication port of the computer is good.
Maintenance
Use a soft, dry cloth to clean the device. Do not use
alcohol, paint thinner or benzene to clean. Make sure that the
device is stored and operated in an environment away from
liquids and stains.
7.
Failure and Maintenance
