background image

EN - 4

A-6910

Read all Instructions before using.

DaNgER

to reduce the risk of electrocution:

1.  Always unplug this product immediately after using.

2.  Do not use while bathing.

3.  Do not place or store product where it can fall or be pulled into a tub or sink.

4.  Do not place in or drop into water or other liquid.

5.  Do not reach for a product that has fallen into water. Unplug immediately.

WaRNINg

To reduce the risk of burns, electrocution, fire or injury to persons:

1.  A product should never be left unattended when plugged in.

2.  Close supervision is necessary when this product is used by, on, or near children or physically incapacitated 

individuals.

3.  Use this product only for its intended use as described in this guide. Do not use attachments not recommended by 

the manufacturer.

4.  Never operate this product if:

 

a.   It has a damaged power cord or plug.

 

b.   It is not working properly.

 

c.   It has been dropped or damaged.

 

d.   It has been dropped into water.

 

Return the product to an authorized DeVilbiss provider for replacement.

5.  Keep the power cord away from heated surfaces.

6.  Never use while drowsy or asleep.

7.  Never drop or insert any object into any opening or hose.

8.  Do not use in an oxygen enriched environment.

9.  Do not use this product with a DC to AC converter, or with an AC voltage and/or frequency other than specified.

10.  Care should be taken when this product is used in the vicinity of other electronic equipment concerning the possible 

interference between them. They may need to be moved apart.

note– If replacement of the cord or plug is necessary, contact your authorized DeVilbiss provider.
note– The exterior surfaces of the unit and the air outlet connector may become slightly warm to the touch during use. 

This is normal.

gENERaL pRECauTIONS

1.  Before use, thoroughly read and understand the information contained in this instruction manual.

2.  Ensure the dryness of the inlet filter for proper operation. If the inlet filter becomes moist, replace it with a dry filter 

and allow the wet filter to dry.

3.  This device is not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or 

nitrous oxide.

4.  Unplug the device before filling. Do not overfill.

5.  Always unplug the device immediately after using it.

DRug uSE WaRNINg

Always follow the doctor’s instructions regarding the type of drug to be used, the dosage, the frequency, and duration of 

the treatment. This device has been designed for use with aqueous solutions of drugs; drugs that are too dense or oily will 

not be nebulized correctly.

SavE ThESE INSTRuCTIONS

Reviews: