SB-2-199-F Page 7
TROUBLESHOOTING (continued)
CONDITION
CAUSE
CORRECTION
Thin, sandy coarse finish drying
before it flows out
Thick, dimpled finish "orange peel"
Gun too far from surface.
Too much air pressure.
Improper thinner being used.
Gun too close to surface.
Air pressure too low.
Improper thinner being used.
Material not properly mixed.
Surface rough, oily, dirty.
Check distance. Normally approx. 6-8".
Reduce air pressure and check spray
pattern.
Follow paint manufacturer's mixing instrs.
Check distance. Normally approx. 6-8".
Too much material coarsely atomized.
Increase air pressure or reduce fluid flow.
Follow paint manufacturer's mixing instrs.
Follow paint manufacturer's mixing instrs.
Properly clean and prepare.
WR-103 Wrench
Contains all necessary
tip, hose and nut sizes
used on or with gun.
HAV-500 OR
HAV-501
Adjusting Valve
(HAV-501 SHOWN)
Spray Gun Lube
SSL-10 (2 oz. bottle)
40-128
Twin Cartridge,
Paint Spray
Respirator
HAF-507
Whirlwind™
In-Line
Air Filter
Removes wa-
ter, oil, and de-
bris from the
air line.
GTI-5033-2000
Air Cap Test Kits
The purpose of this test kit is to measure
air cap atomizing air pressure at the center
air port of the air cap. Used to confirm
code compliance and as a daily quality
control measure.
NIOSH-Certified (TC-
84A-1623) for respiratory
protection in atmos-
pheres not immediately
dangerous to life.
Compatible with all paint
materials; contains
no silicone or petro-
leum distillates to con-
taminate paint. MSDS
Sheet available upon
request.
Joins any single
piece DeVilbiss
air cap with latest
version MBC-368,
MSA-1 or GTI-3
retaining rings.
Helps prevent parts
loss and provides
easier assembly.
JGA-156-K10
Spring Clips
ACCESSORIES
Automotive Quick Connects For HVLP Guns (Air)
High Flow Type.
HC-4720
Coupler
1/4" NPT(F)
HC-1166
Stem
1/4" NPT(M)
HC-4419
Stem
1/4" NPT(F)
HC-4719
Coupler
1/4" NPT(M) /
NPS(M)
KK-5060 Air Cap
Cleaning Kit
Consists of: 2
brushes, 1 wire
pick. Helps keep
air cap clean and
performing prop-
erly.
HARG-510
Air Regulator
Use to maintain
nearly constant
outlet pressure
despite changes
in inlet pressure
and downstream
flow.
192212 Professional Spray Gun Cleaning Kit
Contains six precision
tools designed to effec-
tively clean all DeVilbiss,
Binks, Finishline and
other brand spray guns.
192218 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a pre-
moistened hand cleaner
towel for painters, body
men and mechanics that
go where you go and no
water is needed.
