DeVilbiss JGP-504, Quick Start Manual

Page 8      SB-2-291-C

Enables user to control 

and reduce air usage at 

the  gun.  Ideal  for  low 

pressure spraying.

42884-214-K5 3/8"

42884-215-K10 5/8"

Cleaning Brushes

P-H-5516 Air Ad-

justing Valve

HAV-500 OR

HAV-501

Adjusting Valve

(HAV-501 SHOWN)

HAV-500 does not have 

pressure  gage.    Use 

to  control  air  usage 

at gun.

HD-503 Solvent-

Saver™ Hose/

Gun Cleaner

These brushes are help-

ful  in  cleaning  threads 

and  recesses  of  gun 

body.

29-3100 Scrubs

®

Hand Cleaner 

Towels

Scrubs®  are  a  pre-

moistened hand cleaner 

towel  for  painters.  No 

water is needed.

VS-531 Low Pres-

sure 

Strainers

83GZ-5200  

SolventSaver™ 

Hose/Gun Cleaner

Spray Gun Lube

SSL-10 

(2 oz. bottle) 

Compatible  with  all 

paint  materials:  con-

tains  no  silicone  or 

petroleum distillates to 

contaminate paint.

2 Qt Hose/Gun Cleaner 

used to clean the inside 

of hose, fluid passage-

ways  of  gun  &  other 

paint equipment. 

The  VS-531  Low  Pres-

sure  Fluid  Strainer 

provides  a  final  filter 

for  trapping  foreign 

particles  in  the  paint 

supply.

2 Gallon galvanized tank 

used to clean the inside 

of  hose  and  material 

passages of the gun.

ACCESSORIES

Joins  any  single  piece 

DeVilbiss  air  cap  with 

latest version MBC-368 

or MSA-1 retaining ring.  

Helps prevent parts loss 

and provides easier as-

sembly.

JGA-156-K10

Spring Clip

Quick Disconnect Approved for 

HVLP Guns (Air)

High Flow Ball and Ring Type

Provides  greater  degree 

of control over cup fluid 

pressure.

HC-4419 1/4" 

NPS(F)

HC-4699

1/4" 

NPT(M)

KB-555 (Aluminum) & 

KB-545-SS (S/S) 2 qt. 

Pressure Feed Cup With 

Regulator

HC-1166

1/4" NPT(M)

HC-4700

1/4" NPT(F)

JGA-444 Fluid Tube 

This  tube  combines  the  fluid  and  air  hoses  at  gun  handle  pre-

venting  dragging  hoses  over  work,  twisting  line  and  improving  

overall gun handling.

JGA-4035-K5  

(3 Piece Packing)

May  be  used  in  place  of 

JGV-463-K3  (2 piece pack-

ing),  in  conjunction  with 

the MSA-4 Spring.

MSA-4-K10  

Fluid Needle Spring  

(Replaces MBD-19)

Provides  reduced 

spring  force  (4  lbs. 

versus 6 lbs.) for easier 

trigger pull.

10/08   ©2008 

 Inc.   All rights reserved.   Printed in U.S.A.

WR-103 Wrench

Contains all necessary 

tip, hose and nut sizes 

used on or with gun.

KK-5033-46MP for JGHV-101-46MP

Air Cap Test Kit

The purpose of this test kit is to measure air cap 

atomizing air pressure at the center air  port of 

the air cap.  Used to confirm code compliance 

and as a daily quality control measure.

WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty.  

DeVilbiss Worldwide Sales and Service Listing: www.devilbiss.com

 Industrial Finishing

DeVilbiss has authorized distributors throughout the world. For techni-

cal assistance or the distributor nearest you, see listing below.

U.S./Canada Technical Service Office: 

195 Internationale Blvd., Glendale Heights, IL 60139

Toll-Free Telephone: 1-888-992-4657 (U.S.A. and Canada only)

Toll-Free Fax: 1-800-368-8401