background image

EN

SB-2-303-F  (1/2016)

8 / 8

Finishing Brands reserves the right to modify equipment specifications without prior notice. 

 

DeVilbiss

®

, Ransburg

®

, BGK

®

, and Binks

®

 are registered trademarks of Carlisle Fluid Technologies, Inc., 

 

dba Finishing Brands. ©2016 Carlisle Fluid Technologies, Inc., dba Finishing Brands. All rights reserved.

WARRANTY POLICY

DeVilbiss products are covered by Finishing Brands one year materials and workmanship limited warranty. 

 

The use of any parts or accessories, from a source other than Finishing Brands, will void all warranties. 

 

For specific warranty information please contact the closest Finishing Brands location listed below.

DeVilbiss is part of Finishing Brands, a global leader in innovative spray finishing 

technologies. For technical assistance or to locate an authorized distributor, 

 

contact one of our international sales and customer support locations below.

USA/Canada  

www.devilbiss.com 

 

info@carlisleft.com 

 

Tel: 1-800-992-4657 

 

Fax: 1-888-246-5732

United Kingdom  

www.finishingbrands.eu 

 

info@carlisleft.eu 

 

Tel: +44 (0)1202 571 111 

 

Fax: +44 (0)1202 573 488

China  

www.finishingbrands.com.cn 

 

mkt@carlisleft.com.cn 

 

Tel: +8621-3373 0108 

 

Fax: +8621-3373 0308 

Mexico  

www.carlisleft.com.mx 

 

ventas@carlisleft.com.mx 

 

Tel: 011 52 55 5321 2300 

 

Fax: 011 52 55 5310 4790

France  

www.finishingbrands.eu 

 

info@carlisleft.eu 

 

Tel: +33(0)475 75 27 00 

 

Fax: +33(0)475 75 27 59

Japan  

www.ransburg.co.jp 

 

overseas-sales@carlisleft.co.jp 

 

Tel: 081 45 785 6421 

 

Fax: 081 45 785 6517 

Brazil  

www.devilbiss.com.br 

 

vendas@carlisleft.com.br 

 

Tel: +55 11 5641 2776  

Fax: 55 11 5641 1256

Germany  

www.finishingbrands.eu 

 

info@carlisleft.eu 

 

Tel: +49 (0) 6074 403 1 

 

Fax: +49 (0) 6074 403 281

Australia  

www.finishingbrands.com.au 

 

sales@carlisleft.com.au 

 

Tel: +61 (0) 2 8525 7555 

 

Fax: +61 (0) 2 8525 7500

Summary of Contents for MBC-ZINC-W









Reviews: