14- ENG
A03203
How to Start:
1.
Turn the Off/Auto switch to
"AUTO" and allow tank pressure
to build. Motor will stop when
tank pressure reaches "cut-out"
pressure.
2.
Turn the regulator knob
clockwise until desired pressure
is reached. The compressor is
ready for use.
Before Each Start-Up:
1.
Place Off/Auto switch to "OFF"
and close air regulator.
2.
Turn the regulator knob
counterclockwise until it stops.
3.
Attach hose and accessories.
Risk of Bursting.
Too much air
pressure causes a hazardous risk
of bursting. Check the
manufacturer’s maximum pressure
rating for air tools and accessories.
The regulator outlet pressure must
never exceed the maximum
pressure rating.
Summary of Contents for ProAir II P1015
Page 39: ...39 SP A03203 NOTES NOTAS...