background image

Graco Limited Warranty 

36

3A4476B

Graco Limited Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing 
its name to be free from defects in material and workmanship on the date of sale to the original purchaser 
for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, 
for a period of twelve months from the date of sale, repair or replace any part of the equipment 
determined by Graco to be defective. This warranty applies only when the equipment is installed, 
operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, 
damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or 
improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. 
Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco 
equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper 
design, manufacture, installation, operation or maintenance of structures, accessories, equipment or 
materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an 
authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco 
will repair or replace free of charge any defective parts. The equipment will be returned to the original 
purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material 
or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of 
parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY 
OF FITNESS FOR A PARTICULAR PURPOSE

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. 
The buyer agrees that no other remedy (including, but not limited to, incidental or consequential 
damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential 
loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the 
date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH 
ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED 
BY GRACO

. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, 

etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with 
reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from 
Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other 
goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or 
otherwise.

FOR GRACO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, 
notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or 
indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du 
présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, 
donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures 
concernées.

Summary of Contents for 17M363












Reviews: