16
E
n
g
li
sh
repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a D
e
WALT factory service
center, a D
e
WALT authorized service center or other qualified
service personnel. Always use identical replacement parts.
Full one Year Warranty
D
e
WALT heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due
to faulty materials or workmanship. For warranty repair information,
call 1-800-4-D
e
WALT. This warranty does not apply to accessories
or damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
lAtIn AMerICA: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained either in the packaging, call
the local company or see website for warranty information.
free WArnInG lAbel rePlACeMent: If your warning labels
become illegible or are missing, call 1-800-4-D
e
WALT for a free
replacement.
GLoSSArY
CfM: Cubic feet per minute.
sCfM: Standard cubic feet per minute; a unit of measure of air
delivery.
PsI: Pounds per square inch; a unit of measure of pressure.
kPa (kilopascal): Metric pressure measurement. 1 kilopascal
equal 1000 pascals.
Code Certification: Products that bear one or more of the
following marks: UL, CUL, ETL, CETL, have been evaluated
by OSHA certified independent safety laboratories and
meet the applicable Underwriters Laboratories Standards
for Safety.
California Code: Unit may comply with California Code 46 (l)
()/(M) (). Specification/model label is on the side of the
air tank on units that comply with California Code.
unloader blow-off Pressure:
All models are continuous running
units controlled by air tank pressure. When the maximum
air tank pressure is obtained, the unloader valve will
blow-off. This will cause the compressor to exhaust the air
to the atmosphere and not the tank. This decreases the
load on the engine and allows it to run at a near no-load
condition.
unloader reset Pressure: When the air tank pressure drops
to a predetermined point, the unloader valve closes. The
air tank pressure will now increase until it reaches the
unloader blow-off pressure.
