4
removed. Never stand on the compressor.
HOT SURFACES
Touching exposed metal such as the compressor head or aftercooler
can result in serious burns. Never touch any exposed metal parts on
compressor during or immediately after operation. Compressor will
remain hot for several minutes after operation. Do not move the
compressor while it is running. Hot motor parts could cause burns
contributing to the dropping of the compressor, damaging the
compressor and/or injuring the operator.
RISK FROM NOISE
C A U T I O N : Wear appropriate personal hearing protection
during use. Under some conditions and duration of use,
noise from this product may contribute to hearing loss.
ENGINE
Your air compressor is powered by a Honda
®
g a s o l i n e
engine. Most accidents with engines can be prevented if
you follow all instructions in this manual, the engine owner’s manual
and on the engine. Some of the most common hazards are discussed
herein, along with the best way to protect yourself and others:
•
Know how to stop the engine quickly, and understand
the operation of all controls.
•
Never permit anyone to operate the engine without proper
i n s t r u c t i o n s .
•
Do not allow children to operate the engine.
•
Keep children and pets away from the area of operation.
Refuel with care: ALLOW ENGINE TO COOL. Gasoline is extremely
flammable, and gasoline vapor can explode. Refuel outdoors, in a well-
ventilated area, with the engine off. Never smoke near gasoline, and
keep other flames and sparks away. Always store gasoline in an
approved container. If any fuel is spilled, move compressor to another
location before starting the engine.
Carbon Monoxide Hazards: Exhaust gas contains poisonous carbon
monoxide. Avoid inhalation of exhaust gas. Never run the engine in a
closed garage or confined area.
A LWAYS STORE COMPRESSOR IN A HORIZONTAL POSITION,
ON ALL FOUR RUBBER MOUNTS.
Introduction
Congratulations on the purchase of your new D
E
WA LT Air Com-
pressor! You can be assured that this tool has been constructed with
the highest level of precision and accuracy. Each component has been
rigorously tested to ensure the quality, endurance and performance of
this air compressor.
By reading and following the safety, operation, maintenance and
troubleshooting steps described in this manual, you will receive years
of trouble free operation.
The manufacturer reserves the right to make changes in price, color,
materials, equipment specifications or models at any time without
n o t i c e .
Inspection of Compressor
Inspect for signs of obvious or concealed freight damage. Report any
damage to the delivering freight carrier immediately. Be sure that all
damaged parts are replaced and any mechanical problems are
corrected prior to the operation of the air compressor. The air
compressor serial number is located on the deck of the air compressor
and pump bearing cap. Please write the serial number in the space
provided in the service section for future reference.
Features
PILOT VALVE:
Pilot valves are used to maintain a
constant pressure range while running
c o n t i n u o u s l y. The pilot valve may be
used to operate a discharge line
unloader or an unloading device in the
compressor head. The D
E
WA LT compressor unloads through the com-
pressor head. Unloading occurs when the receivers (tanks) reach a
Gas Manual 10-5-01 2/10/03 2:31 PM Page 4
