DeWalt DC232-XE, Instruction Manual

1

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL, 

CALL US AT: 

1800 654 155

 (Aust) or 

09 526 2556

 (NZ).

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all instructions.

 Failure to follow all 

instructions listed below may result in electric shock, fire 

and/or serious injury. The term “power tool” in all of the warnings 

listed below refers to your mains operated (corded) power tool or 

battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

 1. WORK AREA

a.  Keep work area clean and well lit.

 Cluttered and dark areas invite accidents.

b.   Do not operate power tools in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

c.   Keep children and bystanders away while operating a power tool. 

Distractions can cause you to lose control.

 2. ELECTRICAL SAFETY

a.   Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b.   Avoid body contact with earthed or grounded surfaces such as pipes, 

radiators, ranges and refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded.

c.   Do not expose power tools to rain or wet conditions.

 Water entering a 

power tool will increase the risk of electric shock.

d.   Do not abuse the cord. Never use the cord for carrying, pulling or 

unplugging the power tool. Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords increase the risk of electric 

shock.

e.   When operating a power tool outdoors, use an extension cord suitable 

for outdoor use.

 Use of a cord suitable for outdoor use reduces the risk of 

electric shock.

 3. PERSONAL SAFETY

a.   Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or medication.

 A moment of 

inattention while operating power tools may result in serious personal injury.

b.   Use safety equipment. Always wear eye protection. 

Safety equipment such 

as dust mask, non-skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

c.   Avoid accidental starting. Ensure the switch is in the off-position before 

plugging in. 

Carrying power tools with your finger on the switch or plugging 

in power tools that have the switch on invites accidents.

d.   Remove any adjusting key or wrench before turning the power tool on.

 A 

wrench or a key left attached to a rotating part of the power tool may result in 

personal injury.

e.   Do not overreach. Keep proper footing and balance at all times. 

This 

enables better control of the power tool in unexpected situations.

Definitions: Safety Guidelines 

The definitions below describe the level of severity for each 

signal word. Please read the manual and pay attention to 

these symbols.

DANGER:

 Indicates an imminently hazardous situation 

which, if not avoided, 

will

 result in 

death or serious injury

.

WARNING:

 Indicates a potentially hazardous situation 

which, if not avoided, 

could

 result in 

death or serious injury

.

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or moderate 

injury

.

CAUTION:

 Used without the safety alert symbol indicates a 

potentially hazardous situation which, if not avoided, 

may

result in 

property damage.