background image

been dropped, run over or damaged in any way (e.g., pierced with a 

nail, hit with a hammer, stepped on). Damaged battery packs should 

be returned to the service center for recycling.

WARNING:  Fire hazard. Do not store or carry the battery 

pack so that metal objects can contact exposed battery 

terminals.

 For example, do not place the battery pack in aprons, 

pockets, tool boxes, product kit boxes, drawers, etc., with loose 

nails, screws, keys, etc. 

Transporting batteries can possibly 

cause fires if the battery terminals inadvertently come in 

contact with conductive materials such as keys, coins, hand 

tools and the like.

 The US Department of Transportation Hazardous 

Material Regulations (HMR) actually prohibit transporting batteries in 

commerce or on airplanes (e.g., packed in suitcases and carry-on 

luggage) UNLESS they are properly protected from short circuits. So 

when transporting individual battery packs, make sure that the battery 

terminals are protected and well insulated from materials that could 

contact them and cause a short circuit.

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-Ion)

• 

Do not incinerate the battery pack even if it is severely 

damaged or is completely worn out.

 The battery pack can 

explode in a fire. Toxic fumes and materials are created when 

lithium ion battery packs are burned.

• 

If battery contents come into contact with the skin, 

immediately wash area with mild soap and water. 

If battery 

liquid gets into the eye, rinse water over the open eye for 15 minutes 

or until irritation ceases. If medical attention is needed, the battery 

electrolyte is composed of a mixture of liquid organic carbonates 

and lithium salts.

• 

Contents of opened battery cells may cause respiratory 

irritation.

 Provide fresh air. If symptoms persist, seek medical 

attention.

WARNING: 

Burn hazard. Battery liquid may be flammable if 

exposed to spark or flame. 

The RBRC

®

 Seal

The RBRC

®

 (Rechargeable Battery Recycling Corp oration) Seal on the 

nickel cadmium, nickel metal hydride or lithium-ion batteries (or battery 

packs) indicates that the costs to recycle these

 

batteries (or battery packs) at the end of their useful life 

have already been paid by D

e

WALT. In some areas, it 

is illegal to place spent nickel cadmium, nickel metal 

hydride or lithium-ion batteries in the trash or municipal 

solid waste stream and the Call 2 Recycle

®

 program provides an 

environmentally conscious alternative.
Call 2 Recycle, Inc., in cooperation with D

e

WALT and other battery 

users, has established the program in the United States and Canada 

to facilitate the collection of spent nickel cadmium, nickel metal hydride 

or lithium-ion batteries. Help protect our environment and conserve 

natural resources by returning the spent nickel cadmium, nickel metal 

hydride or lithium-ion batteries to an authorized D

e

WALT service 

center or to your local retailer for recycling. You may also contact your 

local recycling center for information on where to drop off the spent 

battery. RBRC

®

 is a registered trademark of Call 2 Recycle, Inc

.

Important Safety Instructions for All 

Battery Chargers

SAVE THESE  INSTRUCTIONS: 

This manual contains important 

safety and operating instructions for battery chargers.

•  Before using the charger, read all instructions and cautionary 

markings on the charger, battery pack and product using the 

battery pack.

WARNING: 

Shock hazard. Do not allow any liquid to get inside the 

charger. Electric shock may result.

CAUTION: 

Burn hazard. To reduce the risk of injury, charge only 

D

e

WALT rechargeable battery packs. Other types of batteries may 

overheat and burst resulting in personal injury and property damage.

English

5

Summary of Contents for DCD791B

















Reviews: