28
EnGLIsh
a
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
Heavy-Duty Cordless SDS max® Combination
Hammer
DCH417
D
e
WALT
declares that these products described under
Technical
Data
are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
2011/65/EU.For more information, please contact
D
e
WALT
at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT
, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
01.02.2021
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60335‑2‑69EN60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment
of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
DCH417
Voltage
V
DC
54
Type
1
No‑load speed
min
‑1
0–725
No‑load Impact rate
bpm
0–4200
Single impact energy (EPTA 05/2009)
J
4.5
Maximum drilling range in steel/wood/concrete
mm
13/32/32
Maximum diameter for cores
mm
127
Optimum drilling range in concrete
mm
10‑24
Optimum drilling range in concrete for cores
mm
52‑80
Tool holdler
SDS plus®
Collar diameter
mm
54
Battery Type
Li‑Ion
Weight (without battery pack)
kg
4.1
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑6:
L
PA
(emission sound pressure level)
dB(A)
92
L
WA
(sound power level)
dB(A)
103
K (uncertainty for the given sound level)
dB(A)
3
Drilling into concrete
Vibration emission value a
h, HD
=
m/s²
6.3
Uncertainty K =
m/s²
1.5
Chiselling
Vibration emission value a
h,Cheq
=
m/s²
5.2
Uncertainty K =
m/s²
1.5
Drilling into metal
Vibration emission value a
h,D
=
m/s²
≤ 2.5
Uncertainty K =
m/s²
1.5
Screwdriving
Vibration emission value a
h
=
m/s²
≤ 2.5
Uncertainty K =
m/s²
1.5
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL
DCH417
