28
EnGLIsh
a
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
Heavy-Duty Cordless SDS max® Combination
Hammer
DCH735, DCH775
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
2011/65/EU.For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT
, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
26.02.2021
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
DCH735
DCH775
Voltage
V
DC
54
54
Type
1
1
No-load speed
min
-1
177–355
145–290
No-load beats per minute
bpm
1350–2705 1105–2210
Single impact energy (EPTA 05/2009)
J
13.3
19.4
Optimum drilling range into concrete
mm
25–38
28–42
Maximum drilling range in concrete
mm
48
52
Maximum core drilling range in
concrete
mm
40–125
40–150
Bit holder
SDS max
®
SDS max
®
Chisel positions
24
24
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
MHz
mW
433
0.03
433
0.03
Weight (without battery pack)
kg
8.5
9.4
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L
PA
(emission sound pressure level) dB(A)
97
96
L
WA
(sound power level)
dB(A)
108
107
K (uncertainty for the given
sound level)
dB(A)
3
3
Drilling
Vibration emission value a
h, HD
=
m/s²
9.0*
10.1*
Uncertainty K =
m/s²
1.5
1.5
Chiselling
Vibration emission value a
h,Cheq
=
m/s²
8.8*
9.4*
Uncertainty K =
m/s²
1.5
1.5
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER
DCH735, DCH775
Summary of Contents for DCH735
