4
English
a
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Denotes risk of electric shock.
EC-Declaration of Conformity
Machinery Directive
Pole Saw
DCMASPS5
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN62841-1:2015; EN ISO 11680-1:2011,
2000/14/EC, Annex V DEKRA Certification B.V., Meander
1051 / P.O. Box 5185 6825 MJ ARNHEM / 6802 ED ARNHEM
Netherlands
Notified Body ID No.: 0344
LPA (measured sound pressure level) 84 dB(A)
LWA (guaranteed sound power) 102 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
Markus Rompel
Vice-President Engineering, PTE-Europe
D
e
WALT
, Richard-Klinger-Straße 11,
65510, Idstein, Germany
31.12.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
DCMASPS5
Voltage
V
DC
54
Battery type
Li‑Ion
Bar Length
mm
203
Maximum Chain Speed (no‑load)
m/s
6.5
Maximum Cutting Length
cm
15
Oil Capacity
ml
200
Weight
kg
2.7
Noise values and vibration values (triax vector sum)
according to EN62841‑1
L
PA
(emission sound pressure level)
dB(A)
84
K (uncertainty for the given sound pressure)
dB(A)
2.5
L
WA
(sound power level)
dB(A)
99
K (uncertainty for the given sound level)
dB(A)
3
Vibration emission value a
h
=
m/s
2
<2.5
Uncertainty K =
m/s
2
1.5
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
POLE SAW
DCMASPS5
Summary of Contents for DCMASPS5
