DeWalt DCPW550, Instruction Manual

13

English

Register Online

Thank you for your purchase. Register your product now for:
• 

WARRAnTY sERViCE:

 Registering your product will 

help you obtain more efficient warranty service in case 
there is a problem with your product.

• 

COnFiRMATiOn OF OWnERshiP:

 In case of 

an insurance loss, such as fire, flood or theft, your 
registration of ownership will serve as your proof 
of purchase.

• 

FOR YOUR sAFETY: 

Registering your product will 

allow us to contact you in the unlikely event a safety 
notification is required under the Federal Consumer 
Safety Act.

•  Register online at 

www.dewalt.com

Repairs

The charger and battery pack are not serviceable. There are 
no serviceable parts inside the charger or battery pack.

WARNING:

 To assure product SAFETY and RELIABILITY, 

repairs, maintenance and adjustment (including brush 
inspection and replacement, when applicable) should 
be performed by a 

D

e

WALT

 factory service center or a 

D

e

WALT

 authorized service center. Always use identical 

replacement parts.

Accessories

WARNING: 

Since accessories, other than those offered 

by 

D

e

WALT

, have not been tested with this product, use 

of such accessories with this tool could be hazardous. 
To reduce the risk of injury, only 

D

e

WALT

 recommended 

accessories should be used with this product.

Recommended accessories for use with your tool are available 
at extra cost from your local dealer or authorized service 
center. If you need assistance in locating any accessory, please 
contact 

D

e

WALT

 call 1‑800‑4‑

D

e

WALT

 (

1‑800‑433‑9258

) or 

visit our website: 

www.dewalt.com

.

Storage

•  Always completetely empty water from the suction hose, 

power cleaner, spray wand, nozzles, and soap bottle. 

•  Store in a dry, covered location above freezing 

temperature. 

sTORE inDOORs.

Three Year Limited Warranty

For warranty terms, go to https://

www.dewalt.com

/Legal/

Warranty/3‑Year‑Limited‑Warranty.
To request a written copy of the warranty terms, contact: 
Customer Service at 

D

e

WALT

 Industrial Tool Co., 701 East 

Joppa Road, Towson, MD 21286 or call 1‑800‑4‑

D

e

WALT

(

1‑800‑433‑9258

).

4.  Unclog any debris from the nozzle.
5.  Run water from a faucet or garden hose through 

the nozzle. 

Soap Bottle (Fig. A)

1.  To clean the soap bottle, shut off the power cleaner and 

turn off the water supply.

2.  Pull trigger on gun handle to relieve any water pressure.
3.  Decouple the soap bottle 

 11 

 from the power cleaner 

and unscrew the soap bottle nozzle.

4.  To clean the soap bottle 

 11 

, empty any remaining 

detergent back into its container. Use water from a 
garden hose to thoroughly rinse out the bottle. Empty 
the bottle and allow it to dry.

5.  Reinstall soap bottle nozzle to the soap bottle.

Suction Hose (Fig. M)

1.  To clean the suction hose  

 12 

, shut off the 

power cleaner.

2.  Pull trigger switch to relieve any water pressure.
3.  Decouple the suction hose 

 12 

 from the power cleaner.

4.  To clean the suction hose, use water from a garden hose 

to thoroughly rinse out the suction hose and allow it 
to dry.

Suction Hose Filter (Fig. M)

•  Turn the filter 

 20 

 on the end of the suction hose 

 12 

counterclockwise and remove. Remove the strainer from 
inside of the filter. Rinse all of the parts with clean water 
and reassemble.

Quick Connect Filter (Fig. A, N)

1.  Pull back the collar on the quick connect hose 

adapter 

 13 

 and remove the garden or suction hose from 

the quick connect filter 

 7 

 .

2.  Remove the quick connect filter from the power cleaner.
3.  Inside the quick connect filter 

 7 

 is a screen filter 

 21 

. 

Remove the screen filter and rinse with clean water 
and reassemble.