background image

English

1

English (original instructions)

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk 
of personal injury or property damage.

 

DANGER:

 Indicates an imminently hazardous situation which, if not avoided, 

will 

result in 

death or serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation which, if not avoided, 

could

 result in 

death or serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

minor or moderate injury

.

 

(Used without word) Indicates a safety related message.

NOTICE:

 Indicates a practice 

not related to personal injury

 which, if not avoided, 

may

 result in 

property damage

.

 

WARNING! Read all safety warnings and all 
instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury.

WARNING:

 To reduce the risk of injury, read the 

instruction manual.

if you have any questions or comments about this or 
any 

D

e

WALT

 tool, call us toll free at:  

1-800-4-

D

e

WALT

 (1-800-433-9258).

Trigger switch

Lock-off button

Blade clamp release lever

Shoe

Hand grip

Battery pack

Battery release button

Main handle

Fig. A

1

2

3

4

5

6

7

8

Summary of Contents for DCS367B












Reviews: