Model
P1000
Cat. No.
ddF211000P
P1000
1
P1000
OPERATING INSTRUCTION MANUAL
™
Prior to oPerating the P1000 tool,
study this manual carefully and develoP a thorough
understanding of the contents.
ProPer training according to the current ansi standard a
10.3, safety requirements for Powder actuated fastening
systems must be comPleted and a d
e
walt qualified
oPerator card must be obtained Prior to oPeration of
the tool. state, local, or other regulations should also
be followed. laws, regulations, and standards regarding
the use of Powder actuated tools may Periodically be
revised. any such revisions may change the safety and
oPerating Procedures described in this manual. d
e
walt,
inc. is not resPonsible for any such revisions which occur
after Publication of this manual. it is the resPonsibility
of the user to maintain familiarity with the current laws,
regulations, and standards that aPPly to the Powder
actuated tool.
TO AvOId SERIOUS INjURy OR dEATh:
never close tool with any Part of hand over
muzzle end.
oPerators and bystanders must wear eye and
hearing Protection.
always assume tool is loaded. do
not Place a finger on the trigger
of loaded tool until muzzle end is
against work surface and you are
ready to make a fastening. never Place your
hand over the muzzle with a Powder load in the
tool. if the tool accidentally discharges the
Piston or fastener may Penetrate your hand resulting
in serious injury.
it is very imPortant that the oPerator
of this tool comPletely reads and
understands the entire tool manual
and comPletes the oPerator’s exam on the last
Page. the warranty will not be valid until the test is
received, with a coPy of your receiPt, and reviewed by
d
e
walt, inc.
Warranty
Three Year Limited Warranty
d
e
walt will repair, without charge, any defects due to faulty
materials or workmanship for three years from the date of
purchase. this warranty does not cover part failure due to
normal wear or tool abuse. for further detail of warranty
coverage and warranty repair information, visit www.dewalt.
com or call 1-800-4-d
e
walt (1-800-433-9258). this
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. this
warranty gives you specific legal rights any you may have
other rights which vary in certain states or provinces.
in addition to the warranty, d
e
walt tools are covered by our:
1 YEAR FREE SERVICE
d
e
walt will maintain the tool and replace worn parts caused
by normal use, for free, any time during the first year after
purchase.
90 DAY MONEY BACK GUARANTEE
i
f you are not completely satisfied with the performance of
your d
e
walt Powder actuated tool for any reason, you can
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions aske
d.
FREE WARNING LABEL REPLACEMENT:
if your warning labels become illegible or are missing call
1-800-4-d
e
walt (1-800-433-9258) for a free replacement.
do not oPerate the P1000 tool until you have read this manual
and received the ProPer training according to ansi standard a 10.3-1995.
Low velocity Powder
Actuated Fastening Tool
R2200
POW2271_P1000_booklet.indd 1
3/10/14 12:43 PM
Summary of Contents for DDF211000P
Page 30: ...P1000 Model P1000 Modelo P1000 ModÈlE P1000 30 POW2271_P1000_booklet indd 30 3 10 14 12 43 PM ...
Page 31: ...P1000 Model P1000 Modelo P1000 ModÈlE P1000 31 POW2271_P1000_booklet indd 31 3 10 14 12 43 PM ...
Page 32: ...P1000 Model P1000 Modelo P1000 ModÈlE P1000 32 POW2271_P1000_booklet indd 32 3 10 14 12 43 PM ...
