19
E
4.
Select as the measurement type.
• Press
to display the Main Menu
(Figure
E
2
).
• Press to select .
• Press
to display the Measurement
Type Menu (Figure
E
3
).
• Press the arrow buttons to select .
• Press
.
5.
Position the tool opposite the approximate
center of the vertical height to be
measured (Figure
Q
1
).
6.
Point the laser toward the lowest point of
the building or object whose height you
need to measure (Figure
Q
2
).
7.
Press
to measure the distance.
8.
From the same point
, aim the laser at
the highest point of the building or object
(Figure
Q
3
).
9.
Press
to measure the distance.
10.
On the bottom line of the screen, view the
height of the building or object (Figure
Q
4
).
Measuring Partial Height of a Wall
If you need to determine the height of a
section of a wall or object (e.g., the distance
from the ceiling to the top of TV or window on
the wall) (Figure
R
).
1.
Point the tool's laser (Figure
A
1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press
(Figure
A
3
) to turn the tool
on and display the red laser dot.
3.
Make sure the tool position setting
(Figure
C
4
) is correct for taking the
measurement.
4.
Select
as the measurement type.
• Press
to display the Main Menu
(Figure
E
2
).
• Press to select .
• Press
to display the Measurement
Type Menu (Figure
E
3
).
• Press the arrow buttons to select .
• Press
.
5.
Point the laser at the highest point of the
wall or object (Figure
R
1
).
6.
Press
to measure the distance to
the top of the tall object.
7.
From the same point
, aim the laser at
the top of the obstruction on the wall or
object (Figure
R
2
).
8.
Press
to measure the distance from
the top of the wall to the obstruction (TV,
window, etc.).
9.
From the same point
, aim the laser on a
horizontal line straight ahead toward the
bottom of the wall (Figure
R
3
).
10.
Press
to measure the distance.
11.
On the bottom line of the screen, view
the distance between the top of the wall
and the top of the obstruction on the wall
(Figure
R
4
).
Measuring Height of Obstructed Object
Follow these steps to determine the height
of a tall building or object that is blocked by
other buildings or objects (Figure
S
).
1.
Point the tool's laser (Figure
A
1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press
(Figure
A
3
) to turn the tool
on and display the red laser dot.
Summary of Contents for DW0165N
Page 6: ...6 Figures 1 0100m 2 7390 m 50 0 2 1000 m P Q R ...
Page 7: ...7 4 8270m 24 3 0 0320 m 24 3 S T ...
Page 9: ...9 50 0 180 90 180 X 15 0 15 0 V W ...
Page 81: ...Notes ...
