DeWalt DW349, Original Instructions Manual

E N G L I S H

4

JIG SAW 
DW349

Congratulations!

You have chosen a D

E

WALT tool. Years of 

experience, thorough product development and 
innovation make D

E

WALT one of the most reliable 

partners for professional power tool users.

Technical Data

DW349-B4 DW349-B5 DW349-ZA

Voltage V

 127  220-240  230

Power input 

W

 500 

500 

500

Frequency Hz

 60 

50 

50

No-load speed  /min

 800-3200  800-3200  800-3200

Stroke length 

mm

 20 

20 

20

Weight  

kg

 2.7 

2.7 

2.7

Defi nitions: Safety Guidelines 

The definitions below describe the level of severity 
for each signal word. Please read the manual and 
pay attention to these symbols.

DANGER: 

Indicates an imminently 

hazardous situation which, if not avoided, 

will

 result in 

death or serious injury

.

WARNING:

 Indicates a potentially 

hazardous situation which, if not 
avoided, 

could

 result in 

death or 

serious injury

.

CAUTION:

 Indicates a potentially 

hazardous situation which, if not 
avoided, 

may

 result in 

minor or 

moderate injury

.

 NOTICE: 

Indicates a practice 

not 

related to personal injury

 which, if 

not avoided, 

may

 result in 

property 

damage

. 

 Denotes risk of electric shock.

 Denotes risk of fire.

   WARNING:

 To reduce the risk of injury, 

read the instruction manual.

General Power Tool Safety Warnings

WARNING Read all safety warnings 
and instructions

 Failure to follow the 

warnings and instructions may result in 
electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS 

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool or 
battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) 

Keep work area clean and well lit. 

Cluttered or dark areas invite accidents.

b) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of 
flammable liquids, gases or dust.

Power 

tools create sparks which may ignite the dust 
or fumes.

c) 

Keep children and bystanders away while 
operating a power tool. 

Distractions can 

cause you to lose control.

2) ELECTRICAL SAFETY

a) 

Power tool plugs must match the outlet. 
Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools. 

Unmodified plugs 

and matching outlets will reduce risk of 
electric shock.

b) 

Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 

There 

is an increased risk of electric shock if your 
body is earthed or grounded.

c) 

Do not expose power tools to rain or wet 
conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d) 

Do not abuse the cord. Never use the 
cord for carrying, pulling or unplugging 
the power tool. Keep cord away from 
heat, oil, sharp edges or moving parts. 

Damaged or entangled cords increase the 
risk of electric shock. 

e) 

When operating a power tool outdoors, 
use an extension cord suitable for outdoor 
use. 

Use of a cord suitable for outdoor use 

reduces the risk of electric shock. 

f)

If operating a power tool in a damp 
location is unavoidable, use a residual 
current device (RCD) protected supply. 

Use of an RCD reduces the risk of electric 
shock.