DeWalt DWE46253, Instruction Manual

English

11

4.  Position hands and body away from wheel and 

door opening.

5.  Place the door edge flush to work surface, turn the tool 

on and begin grinding. Remove the tool from work 
surface before turning the tool off.

6.  When flush grinding is complete, turn off the tool and 

disconnect from power source. Allow the tool to stop 
rotating before laying it down.

7.  Using the edging door tab 

 16 

, rotate door until it snaps 

into the closed position.

MAINTENANCE

WARNING: To reduce the risk of serious personal 
injury, turn unit off and disconnect it from 
power source before making any adjustments or 
removing/installing attachments or accessories.

An accidental start-up can cause injury.

Replace Brush Skirt (Fig. A)

1.  Turn off the tool and disconnect from power source.
2.  Push worn brush skirt from brush skirt removal 

holes 

 14 

.

3.  Press new brush skirt into brush skirt removal holes 

until secure.

Replacement brush skirts are available at extra cost from 
your local dealer or authorized service center. If you need 
assistance in locating any accessory, please contact 

D

e

WALT

Industrial Tool Co., 701 East Joppa Road, Towson, MD 
21286, call 1–800–4-

D

e

WALT

 (1–800–433–9258) or visit our 

website: www.

D

e

WALT

.com.

Cleaning

WARNING:

 Blow dirt and dust out of all air vents with 

clean, dry air at least once a week. To minimize the risk 
of eye injury, always wear ANSI Z87.1 approved eye 
protection when performing this.

WARNING:

 Never use solvents or other harsh 

chemicals for cleaning the non-metallic parts of 
the tool. These chemicals may weaken the plastic 
materials used in these parts. Use a cloth dampened 
only with water and mild soap. Never let any liquid 
get inside the tool; never immerse any part of the tool 
into a liquid.

Accessories

WARNING: 

Since accessories, other than those 

offered by 

D

e

WALT

, have not been tested with this 

product, use of such accessories with this tool could be 
hazardous. To reduce the risk of injury, only 

D

e

WALT

recommended accessories should be used with 
this product.

Recommended accessories for use with your tool 
are available at extra cost from your local dealer or 
authorized service center. If you need assistance in 
locating any accessory, please contact 

D

e

WALT

 Industrial 

Tool Co., 701 East Joppa Road, Towson, MD 21286, call 
1-800-4-

D

e

WALT

 (1-800-433-9258) or visit our website: 

www.dewalt.com.

Repairs

WARNING: 

To assure product SAFETY and 

RELIABILITY, repairs, maintenance and adjustment 
(including brush inspection and replacement) should 
be performed by a 

D

e

WALT

 factory service center 

or a 

D

e

WALT

 authorized service center. Always use 

identical replacement parts.

Register Online

Thank you for your purchase. Register your product now for:
• 

WARRAnTY sERViCE:

 Registering your product will 

help you obtain more efficient warranty service in case 
there is a problem with your product.

• 

COnFiRMATiOn OF OWnERshiP:

 In case of 

an insurance loss, such as fire, flood or theft, your 
registration of ownership will serve as your proof 
of purchase.

• 

FOR YOUR sAFETY: 

Registering your product will 

allow us to contact you in the unlikely event a safety 
notification is required under the Federal Consumer 
Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

D

e

WALT

 will repair, without charge, any defects due to 

faulty materials or workmanship for three years from 
the date of purchase. This warranty does not cover part 
failure due to normal wear or tool abuse. For further detail 
of warranty coverage and warranty repair information, 
visit www.dewalt.com or call 1-800-4-

D

e

WALT

 (1-800-

433-9258). This warranty does not apply to accessories 
or damage caused where repairs have been made 
or attempted by others. THIS LIMITED WARRANTY IS 
GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED 
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL 
OR CONSEQUENTIAL DAMAGES. Some states do not allow 
limitations on how long an implied warranty lasts or the 
exclusion or limitation of incidental or consequential 
damages, so these limitations may not apply to you. This 
warranty gives you specific legal rights and you may have 
other rights which vary in certain states or provinces.In 
addition to the warranty, 

D

e

WALT

 tools are covered by our:

1 YEAR FREE sERViCE

D

e

WALT

 will maintain the tool and replace worn parts 

caused by normal use, for free, any time during the first year 
after purchase.

90 DAY MOnEY BACK gUARAnTEE

If you are not completely satisfied with the performance of 
your 

D

e

WALT

 Power Tool, Laser, or Nailer for any reason, you 

can return it within 90 days from the date of purchase with 
a receipt for a full refund – no questions asked.