4
ENGLISH
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of squeezing fingers when changing the accessory.
• Health hazards caused by breathing dust developed when
working in concrete and/or masonry.
Package Contents
The package contains:
1 Dust extraction system
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Dust Extraction System
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. A)
The date code which also includes
the year of manufacture, is
printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Dust collection box
2
Dust collection box release
buttons
3
Filter cleaning mechanism
4
Telescope
5
Depth adjustment button
6
Length adjustment button
7
Dust extractor ring
8
Dust extractor ring release
button
9
Worklight
10
Dust extraction head
11
Dust brush
Intended Use
Your dust extraction system DWH205 has been designed for the
extraction of dust in professional hammerdrilling in masonry or
concrete, and with solid drill bits mounted to the power tool.
DO NOT
use for drilling plastic, wood or metal.
DO NOT
use
with hollow bits or core bits.
This dust extraction system will fit the DCH263
D
e
WALT
18V
Max. cordless SDS PLUS hammer.
DO NOT
use under wet conditions or in the presence of
flammable liquids or gases.
The dust extraction system is an attachment for use with
professional power tools.
DO NOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Worklight (Fig. A)
CAUTION: Do not stare into worklight.
Serious eye
injury could result.
There is a worklight
9
located on the top of the dust extractor.
The worklight is activated when the trigger switch is depressed,
and will automatically turn off 20 seconds after the trigger
switch is released. If the trigger switch remains depressed, the
worklight will remain on.
NOTE:
The worklight is for lighting the immediate work surface
and is not intended to be used as a flashlight.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
Attaching and Removing the Dust Extraction
System
To Attach the Dust Extraction System (Fig. B–D)
WARNING: To reduce the risk of personal injury,
ALWAYS operate the tool with the side handle
properly installed and securely tightened.
Failure to
do so may result in the side handle slipping during tool
operation and subsequent loss of control. Hold tool with
both hands to maximize control.
1. Remove the battery pack, drill bit, side handle and the depth
adjustment rod, if attached to the rotary hammer.
2. Press the dust extractor ring release button
8
to open the
dust extractor ring
7
.
3. Holding the front of the dust extractor, insert hammer into
the dust extractor as shown in FIgure C, ensuring that the
electrical connectors
13
on the hammer align with the
electrical connectors on the dust extractor
14
.
NOTE:
Do not hold the dust extractor by the dust collection
box when attaching it to the hammer.
4. With the hammer fully inserted in the dust extractor, press
the dust extractor ring to close. It will click in place when
secure.
5. Test to see if the dust extractor is properly installed on the
rotary hammer:
a. Install the dust extractor.
